IP20 rated table, Floor-standing, table and wall light fitting for indoor use. Made of aluminum and steel. Versions: roy lettura diffusa and roy lettura spot are made of a 97x38mm light diffuser, adjustable by 270° on the horizontal axis and by 180° on the vertical axis, a Ø8mm rod, adjustable by 180° on the vertical axis, which is fastened to a 120x60x20mm support, a 80x180x10mm steel base and Ø8mm rod with a knurled end allowing for the activation and dimming of the light. 100-240V 50-60Hz power supply with plug included. Roy parete diffusa and roy parete spot are made of a 97x38mm light diffuser, adjustable by 270° on the horizontal axis and by 180° on the vertical axis, a Ø8mm rod, adjustable by 180° on the vertical axis and fastened to a 120x60x20mm support for wall mounting which contains the on/off touch sensor. constant voltage power supply not included to be installed remotely. Roy tavolo diffusa and roy tavolo spot are made of a 97x38mm light diffuser, adjustable by 270° on the horizontal axis and by 180° on the vertical axis, a Ø8mm rod, adjustable by 180° on the vertical axis, it is fixed to a 120x60x20mm support that contains the on/off touch sensor. 120x120x6mm steel base. 100-240V 50-60Hz power supply with plug included. Wired with 3000K 6W 576lm led source equipped with a frosted polycarbonate diffuser for diffused light, 3000K 2.2W 148lm led source, 15° optics spot light. roy terra is made of a 244x244mm square base and a 170x18x1747mm monolithic body adjustable by 360° on the vertical axis, 240x240mm base. wired with three 3000K led sources which can be separately dimmable using a linear potentiometer: 36W 3138lm indirect light, 22W 2112lm linear direct light, 11° 2x2.2W 2x148lm spotlight. 240V 50-60Hz power supply with plug included, with 2000 mm power supply cable. Finishes: nero55, copper bronze and polished white.